AIX HBA DRIVER DOWNLOAD

Run the following command to check the location code 0 root finch Document information More support for: Verify the number of MPIO paths per hdisks 8 paths per hdisk for every V hdisk on the management and standby management host. What you set it to will need to be unique, you can set this value to “0x1” for example. There should be 4. PDOA uses quad-port 8Gbps fibre channel adapters so there will be four fcs devices to note down. If a data node was the node with the failed adapter, then up to 6 Vs will have to be updated if there are 3 data nodes in the HA group.

Uploader: Vojora
Date Added: 15 April 2013
File Size: 51.47 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 1451
Price: Free* [*Free Regsitration Required]

When completed, perform the same step for the other Vs in the same HA group. PDOA uses quad-port 8Gbps fibre channel adapters so there will be four fcs devices to note down.

Include the node back into the TSA list After the node is online again in the cluster, delete it from the exclude list with the following command: If you are running this version, run the following to clear the reservation from AIX before proceeding: Pure Storage supports a maximum read and write transfer size of 4MB.

  CDMA MSM QUALCOMM USBDRIVER DRIVER

Use the following command, rmdev, to remove the device definitions.

Understanding the recommended AIX settings and HBA settings

United States English English. For the Foundation module, there will only be one V If a data node was the node with the failed adapter, then up to 6 Vs will have to be updated if there are 3 data nodes in the HA group.

Check here to start a new keyword search. Power down server with the failed HBA. Verify the number of MPIO paths per hdisks 8 paths per hdisk for every Qix hdisk on the management and standby management host.

Document information More support for: ACA is supported starting in Purity 3. For use on versions prior to AIX 6. Power on the server from the HMC 8. What you set it nba will need to be unique, you can set this value to “0x1” for example. Run this command from admin host: Install the new ODM file Reboot the host.

Please repeat this for all devices.

PureData System for Operational Analytics. Replace the card 7. You can now continue adding your subsequent zoned paths and LUN’s. After installing the ODM you will be prompted to reboot. This will also cause a failover to occur and applications will experience a temporary outage.

  KODICOM 4400R SOFTWARE DRIVER

AIX Recommended Settings

Run the following command to check the location code 0 root finch Remove the current ODM file. Keep in mind that you will need to manually make this change anytime you overwrite the ODM i. Repeat for all removed WWPNs.

The physical location code is seen as P1-C5 ax ports fcs4, fcs5, fcs6, and fcs7. None of the above, continue with my search.

How to find HBA Card WWPN Address on AIX – UnixMantra

Click on the drop down to see scanned WWPNs. Reboot, as prompted by the tool. There are several possible combinations of using Bha with Pure Storage, and the configurations differ depending on which one you are using.

This will require a reboot on the initiator, and the steps are as follows: In order to upgrade to the latest version alx the ODM you will need to first remove the old one.